Cuauhtemoc # 17
Buenavista
Tlajomulco de Zuñiga , Jal.
C.P.45640
México
Phone:  +52 (33) 3796-0808
Fax:        +52 (33) 3796-0909

 


 

We manufacture antennas for radio communications, covering the range from 26.965 (citizen’s band radio) to 960 MHz for cellular telephony. Gain from 3 to 15 dB.

Made with aluminum 6063-T5, our antennas are high quality built to avoid noise and obtain an interference-free reception.

We also manufacture parabolic antennas, aluminum-built to even a diameter of 12m for C band and offset type parabolic antennas for KU band; sizes are 1.20, 1.80 and 2.40 meters diameter.

 

Some of our satisfied clients are: Televisa, Multivisión, Telecable de Morelos, Syscom and many others.

This is a 5.00m diameter parabolic antenna built entirely of aluminum 6063-T5, with aluminum sheet  reflecting surface coated with fiberglass to make it more resistant to weather effects.

This antenna is made in 12 sections to facilitate the transportation same as the assembly in the location where mounted, also ships with sustentation polar base (Azimuth/Elevation) as shown in the photo beside.

TABLE 1. TECHNICAL SECIFICATIONS FOR C BAND PARABOLIC ANTENNAS

Diameter 3.00 m 4.00 m 5.00 m
Rate F/D 0.30 0.30 0.30
C band Gain 39.7 dB 42.19 dBi 44.13 dBi
KU Band Gain 49.2 dB 51.73dbi 57.82dbi
Depth of the parable 0.90 1.20 m 1.50 m
Number of sections 8 12 12
Mounting type Az/El Steel- made Steel-made
Dish weight (Approximate) 36.000 Kg. 72.000 Kg. 130.000 Kg.
Base weight (Approximate) 38.000 Kg. 80.000 Kg. 80.000Kg.

 

3m plato

A 3.00m parabolic antenna for C band. Divided in 8 sections to facilitate transportation and the assembly where mounted. Technical specificatios for this antenna are given in Table 1.

 

 

   Offset Antennas
For receiving Direct TV American and Dish Network

-When the operation frequency is higher in an electronic device, the fabrication of it's components becomes more critical, such as wires, connectors and antennas. For KU band is necessary to have an accuracy dish for receiving signals on earth, same as precision on the reflecting surface and in mounting components.

Finding a satellite requires a lot of patience and only with the help of a well-designed, trustable and precise sustentation base it's possible to achieve the reception of a signal and maintain it.

 

Mechanical parts for the mounting base.
CHARACTERISTICS
SIZES IN METERS
1.20
1.80
2.40
GAIN (dBi)
41.27
44.79
47.29
RATE F/D
6.10
6.10
6.10
FOCUS DISTANCE (m)
1.09
1.23
1.46
NUMBER OF SECTIONS
1
1
1

MOUNTING
AZIMUTH / ELEVATION BASE


CLICK OVER THE IMAGE TO SEE THE ANIMATION
 You will need Windows Media Player


  Radio Communication - Base Station Antennas   

This emblem on our products means 28 years of experience in fabrication.

 

AJ-3
Omnidirectional 3dB gain for VHF, very robust and efficient, preferred by it's simple design, lower cost and high efficiency.
See Datasheet

AJ-3 U
Omnidirectional 3dB gain for UHF, covers frequency range from 450 to 470 Mhz.
See Datasheet

AJ-600
Omnidirectional 6 dB gain for UHF covers frequency range from 144 to 174 Mhz.
See Datasheet

AJ-4D
 Omnidirectional 6 dB gain, directional 9dB gain, with 4 dipole and VHF coupling.
See Datasheet


AJ-10
Directional Yagi 10 dB gain with Gamma coupling for 144 to 174 MHz adjust.
See Datasheet

AJ-6U
Omnidirectional 6 dB gain, colinnear and robust. For a range frequency from 450 to 470 Mhz.
See Datasheet.

AJ-3 UD
 Directional Yagi 10 dB gain made with 10 or 12 elements for UHF. Frequency range from 450 to 512 Mhz.

AJ-2
TV channel antenna. Must specify which channel to transmit. Gain range from 5 to 15 dB in arrays of 2 or 4 antennas.

CR-12U
Corner reflector antenna, ideal for high frequency traffic places because of it's rejecting gain of 24 dB. Frequency range covers from 450 to 512 MHz.

AJ3-CB
CB antenna with 3 dB gain, not requires land plane, adjustable for channels 1 to 40.